PREemptâ„¢ CS 20 Protocols

Cleaning Professional Tools: ALL TOOLS (hard plastics/ hard metals) MUST BE CLEANED BEFORE BEING STERILIZED. In a clean sink or bowl, mix PREempt CS20 with warm water (1:128). Using a brush, scrub tools clean by thoroughly removing any dirt or organic matter. Remove from water and thoroughly dry with disposable paper towel.

Disinfecting Professional Tools: Place dry tools in an implement soaker containing PREempt CS20. LEAVE TOOL SOAKING FOR 20 MINUTES. Do not remove tool before 20 minutes. Do not leave tool soaking for longer than 20 minutes. Remove tool from soaker and rinse with water. Wipe dry with disposable paper towel. Discard used paper towel. Store tool in a clean and disinfected area prior to use. PREempt CS20 has a 14 Day Re-use. DO NOT DILUTE PREempt CS20.

Read more or view print friendly PDF

Read More

Topics: Protocols

PREempt Concentrate Protocols

For Circulating Foot Baths: fill tub with cool water above all the water jets. Add PREempt Concentrate at 1:40 (approx. 400ml). Turn on jets and circulate for 5 minutes (to reduce build-up of foam, add 2-3 drops of DEFOAM Plus). Turn off jets and drain. 

Hairdresser Tool Cleaning: ALL TOOLS (hard plastics/hard metals) MUST BE CLEANED BEFORE BEING DISINFECTED. Dilute PREempt Concentrate (1:128) in cold water. Using scrubbing action clean and thoroughly remove any dirt or organic matter. Dry tools with paper towel. Discard used paper towel.

Hairdresser Tool Disinfecting: Place dry tools in a jar soaker containing PREempt Concentrate (1:40). LEAVE TOOL SOAKING FOR 5 MINUTES. Remove tool from soaker and rinse with water. Wipe dry with disposable paper towel. Discard used paper towel. Store tool in a clean and disinfected area prior to use. Change Solution Daily

View print friendly PDFs: Circulating Foot Baths | Hairdresser Tools

Read More

Topics: Protocols

PREemptâ„¢ Ready-To-Use (RTU) Protocols

Surface Disinfection: To clean, spray PREempt RTU and wipe surface removing any dirt or organic matter for 30 seconds. To disinfect, thoroughly spray PREempt RTU on surface. LEAVE SURFACE WET FOR 3 MINUTES. After 3 minutes wipe dry with disposable paper towel. Discard used paper towel.

Disinfecting Non-Circulating Foot Baths: Take apart and remove jets and filters. Clean parts, tub & chair with PREempt RTU for 30 seconds. Use scrubbing action. Rinse parts and tub, and wipe dry. Use  PREempt RTU to wet surfaces of jets/ filter, tub & chair. Wait 3 minutes for disinfection contact time. Rinse and wipe dry, if necessary. Replace jets and lter parts.

View print friendly PDFs: Surfaces | Non-Circulating Foot Baths

Read More

Topics: Protocols

PREempt Wipes Protocols

Surface Disinfection: To clean, wipe surface removing any dirt or organic matter for 30 seconds. To disinfect, thoroughly wipe surface. LEAVE SURFACE WET FOR 3 MINUTES. After 3 minutes wipe dry with disposable paper towel. Discard used paper towel.

Disinfecting Non-Circulating Foot Baths: Take apart and remove jets and filters. Clean parts, tub & chair with PREempt Wipes for 30 seconds. Use scrubbing action. Rinse parts and tub, and wipe dry. Use other side of PREempt Wipes to wet surfaces of jets/ filter, tub & chair. Wait 3 minutes for disinfection contact time. Rinse and wipe dry, if necessary. Replace jets and lter parts.

View print friendly PDFs: Surfaces | Non-Circulating Foot Baths

Read More

Topics: Protocols

PREempt HLD5 Protocols

Cleaning Professional Tools: ALL TOOLS (hard plastics/ hard metals) MUST BE CLEANED BEFORE BEING DISINFECTED. In a clean sink or bowl, mix PREempt HLD5 with warm water (1:128). Using a brush, scrub tools clean by thoroughly removing any dirt or organic matter. Remove from water and thoroughly dry with disposable paper towel.

Disinfecting Professional Tools: Place dry tools in an implement soaker containing PREempt HLD5. LEAVE TOOL SOAKING FOR 5 MINUTES. Do not remove tool before 5 minutes. Remove tool from soaker and rinse with water. Wipe dry with disposable paper towel. Discard used paper towel. Store tool in a clean and disinfected area prior to use. PREempt HLD5 has a 14 Day Re-use. DO NOT DILUTE PREempt HLD5.

View print friendly PDF

Read More

Topics: Protocols